Spot 2800W Electric Radiant Heater
No Aggressive Red Light - Produces
a very ambient modest light
HEATSCOPE® Spot radiant heaters produce a subtle orange glow which is only 30-40% of the light output of the traditional radiant heaters. The reduced light output is due to the use of a color matching grill screen in front of the satin surface carbon heating elements that can be either a black or white. They are midwave radiant heaters that produce heat almost instantly (less than 15 seconds) and are ideal for providing heat to outdoor areas such as partially open patios or balconies.
Configure & Buy
Buy online and get it delivered to your door.Downloads
Customer Inspiration #heatscopeheaters
Key Features
Efficiency made simple
HEATSCOPE® is committed to efficiency! All VISION, SPOT and PURE radiant heaters were developed in accordance with the newest findings concerning the mid-wave IR range. This means that between 90% and 94% of the energy used is turned directly into ambient heat.
Real infrared
All HEATSCOPE® design radiant heaters produce natural infrared heat in the (fast) mid-wave IR range. This means that the heat feels particularly pleasant and is effective exactly where it is needed – that’s directly under the first layers of skin, but not too deep in the tissue.
Inviting & cosy
Other radiant heaters use light tubes to produce heat as a by-product – at HEATSCOPE® we exclusively use innovative carbon technology: two carbon spirals are powered with an electric current, they begin to glow and produce a particularly pleasant warmth.
Super fast
Output peaks are a thing of the past with HEATSCOPE® power heaters. Although the heaters start up slowly, they reach 100% in no time: the range of SPOT models take only 15 seconds, and the VISION & PURE range takes a maximum of 30 seconds owing to the glass front.
Full control
The separate model ranges are either delivered with their own IR remote control or with a 4-wire cable for integration into an external control system (output dependent).
Award-winning design
Delivers pleasant heat without the distraction. Clean-cut, modern designs and colours easily blend into any decor.
Weather-resistant
All models are certified with an IP rating for protection against dust, splash-water, and wind.
No aggressive red light
Produces a very ambient, modest light based on double carbon heating elements.
High efficiency
Up to 94% of the energy used is turned into ambient heat and transferred directly to nearby people and surfaces for maximum efficiency.
Smart switch
Operate and sync your heater(s) with your smart device (compatible with Alexa and Google Assistant). *Internet connection and additional accessories required
2-year warranty
Our radiant heaters come with an industry leading two-year limited warranty.
Technical Specifications
Installation Height
Power / Current
Voltage
Max. Power In
Radiant Efficiency
Visible Light
Coverage Area
This graphic shows the heating performance of Heatscope Spot 2800W heaters. Please note that the heat output always depends on a wide range of factors.
They include: Installation environment (indoors or outdoors, enclosed or open, wind-protected or wind-prone), installation height, radiation angles, weather, voltage fluctuations, etc.
Please consider all these factors in your planning.
*All values are approximate. Max. temperature increases achievable in enclosed spaces at 16 °C (dependent on the respective installation conditions and mounting height).
Construction
- MPN (Black) MHS-SM2800AB.100
- MPN (White) MHS-SM2800WT.100
- Weight 4.5kg [9.9lb]
- Model Dimensions mm [in] L 884mm [34.8in] W 184mm [7.2in] H 78mm [3.1in]
- Application Indoor & Outdoor
- Materials Aluminium body, glass ceramic front
- Colours
Accessories
Includes everything you need to easily operate and protect your investment for many years to come.
FAQ's
View AllWhat is the minimum height clearance required?
The lower edge of the heater must be at least 1800mm from the ground for wall mounted installations, and 2000mm for ceiling mounted.
Can all HEATSCOPE® heaters be mounted on the wall or ceiling?
Yes. All models are supplied with a bracket for wall or ceiling mounting.
How does the remote control work?
The remote control has 2 buttons so you can choose to turn on/off each carbon heating element individually for 50% or 100% heat. Alternatively, you can use your smartphone or tablet as remote control via the eWeLink app.
How do I clean my HEATSCOPE® heater?
To clean the appliance, you will need to disconnect the radiant heater from the power supply at least 1 hour after operation. Make sure the heating elements are not glowing anymore before you do this. To wipe off any dirt or dust to the exterior housing, only use a soft damp cloth.
How do you turn the heater on?
Your HEATSCOPE® radiant heater needs to be connected to an electrical circuit. It can then be turned on via a wall switch, a remote control or a smartphone. Please check our optional accessories available.
Can my radiant heater be installed near a power outlet?
The heater must not be installed directly below a power source/socket, and the sides of the unit must be at least 20cm from the nearest power source. For further details, please refer to the installation manual.
Why are carbon fibres better than other heating elements?
The carbon fibre elements used on HEATSCOPE® heaters have a lifespan of at least 10,000 operating hours - this is much longer to tungsten, halogen light tubes or quartz elements used in other heating systems. Also they produce immediate and comfortable heat when and where you need it.
What’s the advantage of installing a WiFi switch?
If you choose the optional wall switch with WiFi connectivity, then you can use your smartphone to turn the HEATSCOPE® on or off. It’s a simple and efficient solution, making outdoor heating easier and more comfortable.
You May Also Like
Collection
300mm Extension Rods Black
£210.00 Extend the reach of your HEATSCOPE® heaters on high ceiling installations
Vision 3200 Lift Box (Case)
£1,095.00 Box case for HEATSCOPE® Vision 3200 unique lift system solution.
300mm Pure Extension Rod Black
£60.00 Extend the reach of your HEATSCOPE® heaters on high ceiling installations
Pure 3000W Electric Radiant Heater
£1,395.00 The previous concept for infrared radiant heaters has been turned upside down and thought of in a completely new way.
Weathershield 3 White
£295.00 The HEATSCOPE® weather shield is designed to protect the Heascope heater from the elements in installations where no covering is possible.
300mm Extension Rods White
£210.00 Extend the reach of your HEATSCOPE® heaters on high ceiling installations
300mm Pure Extension Rod White
£60.00 Extend the reach of your HEATSCOPE® heaters on high ceiling installations
Weathershield 5 Black
£395.00 The HEATSCOPE® weather shield is designed to protect the HEATSCOPE® heater from the elements in installations where no covering is possible.
SmartBox White
£200.00 The SmartBox with IR Remote included is the control unit for HEATSCOPE® Pure heaters.
100mm Pure Extension Rod Black
£50.00 Extend the reach of your HEATSCOPE® heaters on high ceiling installations
100mm Extension Rods Black
£130.00 Extend the reach of your HEATSCOPE® heaters on high ceiling installations
Spot 2800 Lift Frame
£495.00 Frame for HEATSCOPE® Spot 2800 unique lift system solution.How Can We
Help?
Step-by-step guidance to find the right solution for your needs, trade professional benefits, and ongoing support before and after your purchase.
Live Chat-
Project Assistance
From product selection, to material sourcing, and project reviews, our team is here to help.
-
Dedicated Support
Our unparalleled support and versatile product range makes designing with fire simpler than ever.
-
1-on-1 Screenshare
Can't make it to our showroom? Book an online consultation with our team of specialists.
-
Business Programs
Smart pricing, personalised support and unparalleled creative freedom.
-
Exclusive Pricing
Enjoy exclusive discounts across our entire range of fireplaces and fire pits.