Spot 1600W Electric Radiant Heater
No Aggressive Red Light - Produces
a very ambient modest light
HEATSCOPE® Spot radiant heaters produce a subtle orange glow which is only 30-40% of the light output of the traditional radiant heaters. The reduced light output is due to the use of a color matching grill screen in front of the satin surface carbon heating elements that can be either a black or white. They are midwave radiant heaters that produce heat almost instantly (less than 15 seconds) and are ideal for providing heat to outdoor areas such as partially open patios or balconies.
Configure & BuyBuy online and get it delivered to your door.
Efficiency made simple
HEATSCOPE® is committed to efficiency! All VISION, SPOT and PURE radiant heaters were developed in accordance with the newest findings concerning the mid-wave IR range. This means that between 90% and 94% of the energy used is turned directly into ambient heat.
All HEATSCOPE® design radiant heaters produce natural infrared heat in the (fast) mid-wave IR range. This means that the heat feels particularly pleasant and is effective exactly where it is needed – that’s directly under the first layers of skin, but not too deep in the tissue.
Inviting & cosy
Other radiant heaters use light tubes to produce heat as a by-product – at HEATSCOPE® we exclusively use innovative carbon technology: two carbon spirals are powered with an electric current, they begin to glow and produce a particularly pleasant warmth.
Output peaks are a thing of the past with HEATSCOPE® power heaters. Although the heaters start up slowly, they reach 100% in no time: the range of SPOT models take only 15 seconds, and the VISION & PURE range takes a maximum of 30 seconds owing to the glass front.
The separate model ranges are either delivered with their own IR remote control or with a 4-wire cable for integration into an external control system (output dependent).
Delivers pleasant heat without the distraction. Clean-cut, modern designs and colours easily blend into any decor.
All models are certified with an IP rating for protection against dust, splash-water, and wind.
No aggressive red light
Produces a very ambient, modest light based on double carbon heating elements.
Up to 94% of the energy used is turned into ambient heat and transferred directly to nearby people and surfaces for maximum efficiency.
Power / Current
Max. Power In
This graphic shows the heating performance of Heatscope Spot 1600W heaters. Please note that the heat output always depends on a wide range of factors.
They include: Installation environment (indoors or outdoors, enclosed or open, wind-protected or wind-prone), installation height, radiation angles, weather, voltage fluctuations, etc.
Please consider all these factors in your planning.*All values are approximate. Max. temperature increases achievable in enclosed spaces at 16 °C (dependent on the respective installation conditions and mounting height).
AccessoriesIncludes everything you need to easily operate and protect your investment for many years to come.
Where is the power connector of HEATSCOPE® infrared heaters located?
The HEATSCOPE® VISION and Spot heaters have the power cable attached to the unit on the right and an on/off switch on the back of the unit.
How many amperes does HEATSCOPE® radiant heaters draw?
- Spot 1600W – 13.91 amps at 100% power
- Spot 2800W – 12.17 amps at 100% power
- Vision 3200W – 13.91 amps at 100% power
- Pure 2400W – 10.43 amps at 100% power
Is the radiation emitted by electric infrared heaters dangerous?
No, infrared heaters are a safe source of heat. Infrared heat does not have a high frequency like ultraviolet rays and X-rays, which are known to be dangerous. HEATSCOPE® radiant heaters produce medium to medium-fast waves for a pleasant warmth and minimal light.
What exactly is infrared? And what impact does infrared radiation have?
Every object that gives off heat is an infrared radiator – including the human body. This radiation always depends on the wavelength in which the heat radiation is emitted. There is a difference between short waves, mid-waves and long waves.
The general rule of thumb is: the shorter the wave, the brighter the light emitted and the deeper the rays penetrate into the tissues in the body.
The most effective and pleasant waves are the mid-waves (HEATSCOPE® VISION) or the fast mid-waves (HEATSCOPE® SPOT) – these produce the highest possible heat output with high radiant efficiency whilst generating the lowest possible light output.
What are the main advantages of HEATSCOPE® radiant heaters compared to gas-powered heating appliances?
HEATSCOPE® heaters are easier to install and do not require a gas connection. This provides you with more design flexibility and less hassle. HEATSCOPE® radiant heaters are eco-friendly and don't produce harmful emissions. Additionally, electric infrared heaters are low-maintenance and will not have issues with ignition, gas pressure, or hoses which can kink or crush over time.
What type of heating waves does a HEATSCOPE® radiant heater produce?
Can I install my HEATSCOPE® vertically?
Pure is the only heating system that can be installed vertically or horizontally. Spot and Vision can only be installed horizontally. Please review the installation manual for further instructions.
Are HEATSCOPE® heaters water resistant?
All HEATSCOPE® VISION and SPOT radiant heaters are protected against dust and splash-water (IP44 and IP24)! In other words: the heaters require additional protection from above/behind against persistent or strong rain, such as a canopy or roof.
In general though a wall projection (or similar) is sufficient. If no rear protection is possible and the heater is to hang completely freely, a HEATSCOPE® weather protection shield is obligatory in all cases.
The weather protection shields are available in black or white and incorporate the shape and curvature of the rear side of the design radiant heater.
In this way, HEATSCOPE® VISION (IP44) and SPOT (IP24) heaters are optimally protected against wind and weather.
You May Also LikeCollection
SmartBox Black£100.00 The SmartBox with IR Remote included is the control unit for HEATSCOPE® Pure heaters.
Vision 3200 Lift Box (Case)£1,095.00 Box case for HEATSCOPE® Vision 3200 unique lift system solution.
500mm Extension Rods White£290.00 Extend the reach of your HEATSCOPE® heaters on high ceiling installations
300mm Extension Rods White£210.00 Extend the reach of your HEATSCOPE® heaters on high ceiling installations
Dual Fixing Brackets (2 Heaters)£190.00 Install two heaters in one mounting system using HEATSCOPE® Dual Fixing Brackets.
Weathershield 3 White£295.00 The HEATSCOPE® weather shield is designed to protect the Heascope heater from the elements in installations where no covering is possible.
300mm Extension Rods Black£210.00 Extend the reach of your HEATSCOPE® heaters on high ceiling installations
SmartBox White£200.00 The SmartBox with IR Remote included is the control unit for HEATSCOPE® Pure heaters.
100mm Extension Rods Black£130.00 Extend the reach of your HEATSCOPE® heaters on high ceiling installations
Weathershield 3 Black£295.00 The HEATSCOPE® weather shield is designed to protect the HEATSCOPE® heater from the elements in installations where no covering is possible.
500mm Extension Rods Black£290.00 Extend the reach of your HEATSCOPE® heaters on high ceiling installations
100mm Extension Rods White£130.00 Extend the reach of your HEATSCOPE® heaters on high ceiling installations
How Can We
Step-by-step guidance to find the right solution for your needs, trade professional benefits, and ongoing support before and after your purchase.Live Chat
From product selection, to material sourcing, and project reviews, our team is here to help.
Our unparalleled support and versatile product range makes designing with fire simpler than ever.
Can't make it to our showroom? Book an online consultation with our team of specialists.
Smart pricing, personalised support and unparalleled creative freedom.
Enjoy exclusive discounts across our entire range of fireplaces and fire pits.