Pure 2400W Electric Radiant Heater
Electric infrared radiant heating is practical, functional, convenient and efficient. If you’re looking for a discrete heating appliance that can be used both indoors and outdoors, in large open spaces or undercover areas, and is space-saving as well as environmentally friendly - then the HEATSCOPE® PURE electric infrared radiant heater is the ideal solution for you. Its flexibility makes it ideal for homes, restaurants, cafes, on terraces or in marquees - wherever you need an effective, unobtrusive heater.
Configure & BuyBuy online and get it delivered to your door.
Model SpecsTechnical information about the model and the included burner.
C&I ManualClearances & Installation information about the product.
User ManualInstallation, operation and maintenance manual.
PURE’s Ingress Protection (IP) rating of IP65 (exceeding the standard IPX5 rating of other brands) enables installation in indoor, semi-enclosed and fully exposed outdoor environments. PURE can withstand general all-weather conditions of wind (dust) and rain. That means it doesn‘t need a protective shield or any additional protection from the elements.
Easily and accurately change the angle via the swivel joint mount for precise heating. The clean wavelength of light is only absorbed by solid objects, transferring heat directly to a person, table or floor rather than heating the air. Heat won’t simply “blow away” in windy or drafty conditions.
Cleaner, Greener Heat
PURE converts over 90% of input energy directly into radiant heat and operates at a smarter cost per hour. No greenhouse gases or unpleasant odours are emitted, and they don’t require ventilation or a flue.
At the flick of a switch, PURE reaches maximum output in just 20 seconds producing immediate, comfortable heat when and where you need it.
Curved Glass-Ceramic Screen
The only electric infrared radiant heater worldwide fitted with a convex SCHOTT NEXTREMA® glass front. Spreads warmth evenly across an area while minimising light emission. Beautifully resolved with black or white coloured glass.
Constructed from premium materials and made with meticulous attention to detail - PURE strikes the perfect balance between innovative styling and technical performance. Available in either black or white PURE is an elegant yet powerful heating solution for all environments.
Maximum Heat with Minimum Light
Carbon fibre elements charged with an electric current generate heat but minimal light, creating a softer, super comfortable heat without the harsh light. PURE provides a subtle, low glow, which doesn’t change the lighting effect of a room or the colour of objects (including food!).
Simple Maintenance, Ultra Durable
No valves, ignition components or burners to maintain or repair. Aluminium chassis means it won’t discolour or tarnish over time and provides superior design, shape and heat transfer.
Ease of Use
Single ON/OFF switch, plus two adjustable output levels – 100% and 50%. Can also be integrated with Smart Home Systems – perfect for the connected home.
Dedicated wall & ceiling mounts (which only need two screws to be securely attached), enable subtle placement anywhere.
Delivers pleasant heat without the distraction. Clean-cut, modern designs and colours easily blend into any decor.
Noticeable heat within milliseconds and 100% heat within 15-60 seconds.
All models are certified with an IP rating for protection against dust, splash-water, and wind.
No Aggressive Red Light
Produces a very ambient, modest light based on double carbon heating elements.
Up to 94% of the energy used is turned into ambient heat and transferred directly to nearby people and surfaces for maximum efficiency.
Operate and sync your heater(s) with your smart device (compatible with Alexa and Google Assistant). *Internet connection and additional accessories required
Our radiant heaters come with an industry leading two-year limited warranty.
Power / Current
Max. Power In
This graphic shows the heating performance of Heatscope Pure 2400W heaters. Please note that the heat output always depends on a wide range of factors.
They include: Installation environment (indoors or outdoors, enclosed or open, wind-protected or wind-prone), installation height, radiation angles, weather, voltage fluctuations, etc.
Please consider all these factors in your planning.*All values are approximate. Max. temperature increases achievable in enclosed spaces at 16 °C (dependent on the respective installation conditions and mounting height).
AccessoriesIncludes everything you need to easily operate and protect your investment for many years to come.
What is the minimum height clearance required?
HEATSCOPE® radiant heaters require a space of at least 1800mm from the ground to the lower edge of the unit. Please follow the safety clearances from the wall and ceiling as detailed in the installation manual.
Can I install the HEATSCOPE® heater in my bathroom?
Spot and Vision models must not be installed in or near areas where there is high level of humidity such as bathrooms, spas, bathtubs, showers, or pools. However, Pure is rated IP65 with a higher level of protection against water and can be installed in and near these spaces.
Why are there design heaters with and without a glass front?
At HEATSCOPE® you can choose between different model ranges. The main difference – along with the length and output – is the design of the front side.
The VISION ambient heater has been equipped with a SCHOTT® NEXTREMA® glass ceramic front, whereas the SPOT power heater has an open fin front screen.
The NEXTREMA® glass reduces the already low light output (only 30% when compared with conventional heaters) by half again to reach a barely perceptible minimum of just 15%. However the glass front also makes the ambient heater more vulnerable to wind.
For this reason, the VISION models should only be used in areas protected from wind.
What are the advantages of HEATSCOPE® heaters over traditional heating systems (such as “mushroom-type” patio heaters?
HEATSCOPE® infrared radiant heaters generate heat directly unlike gas patio heaters which produce a high level of CO2 emissions and only provide heat when in close proximity to the unit. HEATSCOPE® infrared heaters are quiet and do not emit odors as they electrical. For commercial use or for a city apartment terrace where floor space is paramount, the HEATSCOPE® heaters will free up a fair amount of space.
Can HEATSCOPE® heaters be mounted directly on a wooden structure?
HEATSCOPE® infrared heaters are supplied with optional mounting devices such as spacers to meet the recommended minimum clearances from combustible material. When used, it is safe to mount the appliance to the wood supporting structure.
Do I need a separate remote control for each HEATSCOPE® heater?
No, one remote control works with multiple heaters. To control the HEATSCOPE® VISION and Spot heaters simply hold the remote control toward the respective heater and alter the setting (either up or down) to the desired power level.
How many amperes does HEATSCOPE® radiant heaters draw?
- Spot 1600W – 13.91 amps at 100% power
- Spot 2800W – 12.17 amps at 100% power
- Vision 3200W – 13.91 amps at 100% power
- Pure 2400W – 10.43 amps at 100% power
Where do I buy HEATSCOPE® radiant heaters?
You can purchase it on our website at heatscopeheaters.com. If you are a trade professional and are interested in taking advantage of our program benefits, please contact our business consultants.
How Can We
Step-by-step guidance to find the right solution for your needs, trade professional benefits, and ongoing support before and after your purchase.Live Chat
From product selection, to material sourcing, and project reviews, our team is here to help.
Our unparalleled support and versatile product range makes designing with fire simpler than ever.
Can't make it to our showroom? Book an online consultation with our team of specialists.
Smart pricing, personalised support and unparalleled creative freedom.
Enjoy exclusive discounts across our entire range of fireplaces and fire pits.